Used CNG Compression skid 150 SCFM (1.2 GGE A MIN) 75HP

Posted by on Sep 5, 2018 in Used CNG Equipment

Used CNG Compression skid 150 SCFM (1.2 GGE A MIN) 75HP

For sale used CNG compression skid on the trailer ready to plug and play. This is a trailer-based used CNG compression skid with 75HP electric motor that will plug into 30 psi inlet pressure, and deliver 150 scfm (1.2 GGE a minute) at 4000 psi. To operate this trailer you will need a 3 phase electrical line at 480 Volts.  This trailer was manufactured by IMW in 1998 and currently have little over 3000 hours on it. We know the CNG service tech that has serviced this unit from its birth and he stated that the unit had only 2000 hours put on in until 2017. The remaining over 1000 hours were put the last year of operation. The unit was fully functioning and operational when it was taken out of the service in August 2018, to be replaced with a larger unit. We have been told that the unit runs strong and other than flickering of one of the LCD screens there are no known problems. The used CNG compressor package will be sold AS IS with no warranty. The owner can accommodate pre-purchase inspections and he is glad to provide all service and maintenance records available. This CNG compression skid can be easily deployed in public or private CNG fueling station set up to provide CNG fueling for a small to mid size fleet. Mobilization and commissioning should be fairly simple compare to other solutions available out there. As you may have noticed from the pictures the unit also has a priority panel and it can be connected with storage and dispensing equipment without a need for another priority panel. All of the sequencing can be done at the unit allowing you to deploy simpler and cheaper (dumb) dispensers. Selling price is $50,000 in Alabama. The unit can be picked up with your trailer or it can come with the trailer it sits on right now. For a long-distance trip the trailer will require new tire, breaks, lights (roughly estimated at under $3K)   More Technical details: Unit Model: IMW 50SA / 75L 4 – 4100 Manufactured in  1998 Serial NO: 8164 Inlet (suction) pressure: 30 psi Discharge Pressure: 4100 psi Flow Rate: 150 SCFM Speed: 670 RPM   Cylinder 1st: 6.25″ Cylinder 2nd: 3.5″ Cylinder 3rd: 2.5″ Bore 4th: 1.25″ Stroke: 5″   Please see pictures below, feel free to contact us with any question at info@cngcenter.com used cng equipment used cng equipment IMW unit To see other used CNG equipment available for sale click here Please contact us with any question at...

Read More »

Used CNG Dryer – 4000 scfm flow – for large CNG stations

Posted by on Aug 11, 2018 in Used CNG Equipment

Used CNG Dryer – 4000 scfm flow – for large CNG stations

For sale 2 identical used CNG Dryers for large CNG fueling station. PPC’s CNG Series twin tower purification systems are completely self-contained, fully automatic, heat-reactivated, closed-loop blower purge desiccant dryers designed to remove water vapor from natural gas and located at the inlet of the booster compressor. Using molecular sleve as the drying media, those systems will continuously dry CNG down to pressure dewpoint as low as -100F and residual levels as low as 0.04 lbs. per MMScf. This unit was specifically engineered for large flow more than 200 scfm heavy duty NGV fleet refuling applications 24 hours a day. The used CNG Dryer will be sold AS IS with no warranty. Selling price is $35,000 at North Los Angeles, CA We have 2 identical units!   More Technical details: Inlet capacity @ 100 psig, 70F is 4460 SCFM In/Out connection size – 4 inches Dimensions: L=115, D=170, H=150 Weight = 12,000 lbs AMLOC CNG Gas Dryer – UNIT # 10 Model: 2500CNG-LAMTASP Volts: 480 Hz: 60 Phase: 3 Amps: 55 PSIG: 300 S/N: 1053619-1   Flairs: MAWP 365  psig @ 450 def F S/N: 960455 MAWP 300 psig @ 450 deg F S/N: 960452 / 960451 MAWP 300 psig @ 450 deg F S/N: 960402 MAWP 300 psig @ 450 deg F S/N: 960380   Download CNG-Twin-Series_Brochure for more detail description of this used CNG dryer Please see pictures below, feel free to contact us with any question at info@cngcenter.com To see other used CNG equipment available for sale click here used cng dryers used natural gas dryer used cng dryer Please contact us with any question at...

Read More »

Used CNG Dryer – Xebec 600 HRB

Posted by on Aug 11, 2018 in Used CNG Equipment

Used CNG Dryer – Xebec 600 HRB

For sale used CNG Dryer – Xebec 600 HRB CNG Twin Tower Natural Gas Dryer. HRBNGX – Fully Automatic Heat Reactivated – Twin Tower CNG Dryers Designed and engineered for large flow and continuous duty cycles. HRBNGX dryers are fully automatic and maximize desiccant regeneration, dewpoint performance and energy efficiency.    Applications: Medium to high flows Low to high pressure designs Recommended for medium to high throughput fueling needs This dryer was running before it was pulled out of its previous application in May 2017.  It was also sealed up and preserved for storage. The used CNG Dryer will be sold AS IS with no warranty. Selling price is $29,000 at our yard in Bakersfield, CA More Technical details: Xebec CNG Dryer Year: 2001 (rebuilt in 2003) Model:  600 HRBNGX 480 V / 3 PH / 60 HZ / 70 Amps S/N: 5596   Brochure https://docplayer.net/40355167-Solutions-natural-gas-dryers-for-ngv-fueling-stations.html Please see pictures below, feel free to contact us with any question at info@cngcenter.com To see other used CNG equipment available for sale click here used cng dryer used cng dryer Please contact us with any question at...

Read More »

Used CNG Ariel Compressor JGP 3 stage – CAT G3306 Nat Gas Engine Drive

Posted by on Aug 11, 2018 in Used CNG Equipment

Used CNG Ariel Compressor JGP 3 stage – CAT G3306 Nat Gas Engine Drive

For sale used Ariel CNG Compressor package (Ariel JGP/2 – 3 Stage /CAT G3306NA ) Used Ariel compressor with natural gas engine drive. Three stage CNG Compressor Package SN: F-9661 The used CNG Ariel Compressor will be sold AS IS with no warranty. Selling price is $75,000.00 at our yard in Bakersfield, CA. The unit can be rebuild and repainted for additional charge. More Technical details: Ariel JGP-2- 3 Frame Stroke: 3″ RPM: 1800 RL: 12,000 SN: F-9661 Ariel 2.75″ JGM Cylinder Bore: 2.75″ Stroke: 3″ MAWP: 1880 SN: C-25982 Ariel 2.75″ JGT-CE Cylinder Bore: 2.75″ Stroke: 3″ MAWP: 2200 SN: C-25983 Ariel 1.25″ JG-HE Cylinder Bore: 1.25″ Stroke: 3″ MAWP: 5280 SN: C-26099 CAT G3306NA Engine RPM: 1800 SN: 07Y04911 Find more information from Ariel Corporation website Please see pictures below, feel free to contact us with any question at info@cngcenter.com To see other used CNG equipment available for sale click here This slideshow requires JavaScript.   Please contact us with any question at...

Read More »

Used CNG Ariel Compressor JGP 4 stage – CAT G3306 Nat Gas Engine Drive

Posted by on Aug 11, 2018 in Used CNG Equipment

Used CNG Ariel Compressor JGP 4 stage – CAT G3306 Nat Gas Engine Drive

For sale used Ariel CNG Compressor package (Ariel JGP/2 – 4 Stage /CAT G3306NA ) Used Ariel compressor with natural gas engine drive. Four stage CNG Compressor Package SN: F-12210 The used CNG Ariel Compressor will be sold AS IS with no warranty. Selling price is $98,000.00 at our yard in Bakersfield, CA More Technical details: Ariel JGP-2- 4 Stage Frame Stroke: 3″ RPM: 1800 RL: 12,000 SN: F-12210 Ariel 8.5″ JGM-CE Cylinder Bore: 8.5″ Stroke: 3″ MAWP: 375 SN: C-34888 Ariel 3.875″ JGT-HE Cylinder Bore: 3.875″ Stroke: 3″ MAWP: 1125 SN: C-34889 Ariel 2.75″ JGT-CE Cylinder Bore: 2.75″ Stroke: 3″ MAWP: 2550 SN: C-34890 Ariel 1.25″ JGT-HE Cylinder Bore: 1.25″ Stroke: 3″ MAWP: 5280 SN: C-34891   CAT G3306NA Engine RPM: 1800 Arng: 102-9435 SN: 07Y06055 Find more information from Ariel Corporation website Please see pictures below, feel free to contact us with any question at info@cngcenter.com To see other used CNG equipment available for sale click here This slideshow requires JavaScript. Please contact us with any question at...

Read More »

Used CNG Ariel Compressor producing 5 GGE per minute – Nat Gas Engine Drive

Posted by on Aug 11, 2018 in Used CNG Equipment

Used CNG Ariel Compressor producing 5 GGE per minute – Nat Gas Engine Drive

For sale used CNG Ariel Compressor Pkg (JGA-4 / CAT G3408TA ) Used natural gas engine drive, Ariel, three stage CNG compressor package with an enclosure which will help reduce the noise level. No electric supply needed, will work using natural gas supply to the site. Attached some performance run with 200 psi suction and 4000 psi discharge, this compressor will do 0.992 MMSCFD. – 41,333 SCFH (over 5.0 GGE a minute) This compressor was running when taken out of service and is complete and in great shape as you can see. The Compressor control panels were kept on site when the used CNG compressor units were removed from the site.  Therefore they will need a control panel prior to being put back into operation to make a complete cng fueling station set up. The used CNG Ariel Compressor will be sold AS IS with no warranty. Selling price is $185,000.00 at our yard in Bakersfield, CA More Technical details: Ariel JGA-4/CAT G33408TA Compressor Package Ariel JGA-4 Frame Stroke: 3″ RPM: 900-1/800 RL: 20,000# SN: F-12325 Learn more about gas compression engine Cat G33408 1st Stage Ariel 2.75″ JG Cylinder Bore: 2.75 Stroke: 3″ MAWP: 2550 SN: C-35310 Ariel 2.75″ JG Cylinder Bore: 2.75 Stroke: 3″ MAWP: 2550 SN: C-35309 2nd Stage Ariel 3″ JGT Cylinder Bore: 3″ Stroke: 3″ MAWP: 2550 SN: C-35313 Ariel 3″ JGT Cylinder Bore: 3″ Stroke: 3″ MAWP: 2550 SN: C-35311 3rd Stage Ariel 1.5″ JGT Cylinder Bore: 1.5″ Stroke: 3′ MAWP: 5280 SN: C-35312 Ariel 1.5″ JGT Cylinder Bore: 1.5″ Stroke: 3′ MAWP: 5280 SN: C-35312 CAT G3408TA Engine RPM: 1800 Arng# 102-9398 SN: 6NB01589 Engine Hrs: 592 Unifin Cooler Engine/Water Jacket MAWP: 100/100 SN: V7230-97-3 MAWP: 900psi @ 2400/5500F Temp: 400F @ 400psi SN: V7230-97-1 Find more information from Ariel Corporation website Please see pictures below, feel free to contact us with any question at info@cngcenter.com To see other used CNG equipment available for sale click here This slideshow requires JavaScript.   Please contact us with any question at...

Read More »